Canon D1300 Series Service Manual Download Page 5

Page: 5 / 176

Service Notes -------------------------------------------------------------------------------2-13

Laser Exposure System --------------------------------------------------- 2-14

Outline -------------------------------------------------------------------------------2-14
Optical Unit Failure Detection --------------------------------------------------2-14
Service Tasks ----------------------------------------------------------------------2-14

Action for Parts Replacement ----------------------------------------------------------2-14
Maintenance --------------------------------------------------------------------------------2-14
Service Notes -------------------------------------------------------------------------------2-14

Image Formation System ------------------------------------------------- 2-15

Outline -------------------------------------------------------------------------------2-15
Image Formation Process ------------------------------------------------------2-15

High-voltage Power Supply ----------------------------------------------------2-18

Outline ----------------------------------------------------------------------------------------2-18

Service Tasks ----------------------------------------------------------------------2-18

Action for Parts Replacement ----------------------------------------------------------2-18
Maintenance --------------------------------------------------------------------------------2-18
Notes on Field Service -------------------------------------------------------------------2-18

Fixing System ---------------------------------------------------------------- 2-19

Outline -------------------------------------------------------------------------------2-19
Fixing Control Circuit -------------------------------------------------------------2-20

Throughput Reduction Control ---------------------------------------------------------2-20
Fixing Temperature Control -------------------------------------------------------------2-21
Protective Function ------------------------------------------------------------------------2-21
Failure Detection ---------------------------------------------------------------------------2-22

Service Tasks ----------------------------------------------------------------------2-22

At Parts Replacement --------------------------------------------------------------------2-22
Maintenance --------------------------------------------------------------------------------2-22
Notes On Service Works -----------------------------------------------------------------2-22

Pickup / Feed System ------------------------------------------------------ 2-24

Outline -------------------------------------------------------------------------------2-24
Drive Configuration ---------------------------------------------------------------2-24

Jam Detection ---------------------------------------------------------------------2-25

Service Tasks ----------------------------------------------------------------------2-26

At Parts Replacement --------------------------------------------------------------------2-26
Maintenance --------------------------------------------------------------------------------2-26
Notes On Service Works -----------------------------------------------------------------2-26

Periodical Services

Periodically Replaced Parts ------------------------------------------------3-2

Consumable Parts ------------------------------------------------------------3-2

Periodical Service -------------------------------------------------------------3-2

Cleaning -------------------------------------------------------------------------3-2

Disassembly/Assembly

List of Parts ---------------------------------------------------------------------4-2

External View ----------------------------------------------------------------------- 4-2

MF5900/6100 Series----------------------------------------------------------------------- 4-2
D1300 Series -------------------------------------------------------------------------------- 4-3

Main Unit ----------------------------------------------------------------------------- 4-4
Main Parts --------------------------------------------------------------------------- 4-5

Sensor / Switch ------------------------------------------------------------------------------ 4-5
Motor / Fan ----------------------------------------------------------------------------------- 4-6
Other ------------------------------------------------------------------------------------------- 4-6
PCB -------------------------------------------------------------------------------------------- 4-7

Connector Layout Drawing ------------------------------------------------------ 4-8

External Cover (D1300 Series) ------------------------------------------ 4-12

Removing the Left Cover Unit -------------------------------------------------4-12
Removing the Left Rear Cover ------------------------------------------------4-14

Summary of Contents for D1300 Series

















































































































































































Search results

Summary of Contents for D1300 Series

Reviews:

Brands by name

Popular brands

Canon D1300 Series, Service Manual

Search results

Summary of Contents for D1300 Series

Reviews:

Brands by name

Popular brands