manualshive.com logo in svg

Canon D1300 Series, Service Manual

Share
Download
Canon D1300 Series Service Manual Download Page 103

4

4

4-51

4-51

Disassembly/Assembly > Controller System > Removing the Main Motor 

Disassembly/Assembly > Controller System > Removing the Main Motor 

Removing the Main Motor 

Preparations

1) Removing the Right Cover Unit.
2) Removing the Left Cover Unit.
3) Removing the Controller Cover.
4) Removing the Left Rear Cover.
5) Removing the NCU PCB.
6) Removing the Main Controller PCB.
7) Removing the Controller Box.
8) Removing the Fixing Assembly.
9) Removing the Engine Controller Unit.

Procedure

1) Remove the Main Switch Mount [1].
•  1 Screw [2]
•  2 Claws [3]

x2

[1]

[2]

[3]

F-4-126

2) Shift the Harness Guide [1] to the left.
•  1 Screw [2]
•  2 Bosses [3] 

[1]

[2]

[3]

CAUTION:

When installing the Harness Guide [1], be sure to place it at rear side of the hook [3] of 
the Harness Guide [2].

[1]

[3]

[2]

F-4-128

F-4-127

Summary of Contents for D1300 Series

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands