Canon D1300 Series, Service Manual

Page: 125 / 176

6
6
6-2
6-2
Trouble Shooting > Test Print > Test Pages > Controller Test Print
Trouble Shooting > Test Print > Test Pages > Controller Test Print
Test Print
Test Pages
Printing test pages helps determine if the printer is functioning.
CAUTION:
There are two types of test pages: engine-test page and formatter-test page. Print a
test page to make sure the printer engine and the formatter are functioning.
■ Engine-test Page
There are two types of engine-test pages simplex print and duplex print.
a. Simplex print
Open and close the cartridge door three times continuously within 2 seconds during the
standby period. The engine-test page should have a test print pattern on one side of media
as shown below.
b. Duplex print
Open and close the cartridge door five times continuously within 2 seconds during the
standby period. The engine-test page should have a test print pattern on both sides of media
as shown below.
F-6-1
■
Controller Test Print
This product provides the following 8 test chart types to determine causes of faulty images.
The data for test charts are created in the main controller. If no problem is found on the output
test charts, the cause may lie in the PDL input or the reader.
TYPE No. can be selected in TESTMODE > PRINT > PG-TYPE.
TYPE No. pattern image check item
0 Grid chart Right angle accuracy
Straight line accuracy
1 Halftone Transfer failure, Black line, White line, Margin
2 Solid black Transfer failure, White line, Margin
3 Solid white Fogging
4 17 gradations Gradation, Black line, White line
5 Thin horizontal line Black line, White line, Parallelism
6 PASCAL correction chart -
7 Chart 128 -
T-6-1