Canon D1300 Series, Service Manual

Page: 108 / 176

4
4
4-56
4-56
Disassembly/Assembly > Controller System > Removing the Duplex Reverse Solenoid
Disassembly/Assembly > Controller System > Removing the Duplex Reverse Solenoid
2) Remove the Harness from the [E], and Remove the Main Fan [1].
• 2 Screws [2]
[2]
[E]
[1]
x2
3) Remove the Duplex Drive Unit [1].
• 3 Screws [2]
[1]
[2]
[2]
x3
CAUTION :
Since the Gear of the Duplex Drive Unit is Not Fixed, be Careful Not to Drop or Lose it
When Removing it.
F-4-141
F-4-142
Removing the Duplex Reverse Solenoid
Preparations
1) Removing the Right Cover Unit.
2) Removing the Right Rear Cover.
3) Removing the Left Cover Unit.
4) Removing the Controller Cover.
5) Removing the Left Rear Cover.
6) Removing the Upper Cover.
7) Removing the Duplex Drive Unit.
Procedure
1) Remove the Duplex Reverse Solenoid [1].
• 1 Screw [2]
[1] [2]
F-4-143