Canon ColorWave 3800 Operation Manual Download

Page: 252 / 358

Copy by set

Introduction

You can use the [Create set] option to make multiple scans and copy in one set.

Procedure

Feed the original face up and centered on the original feeding table.

Tap the copy tile. A window with a list of presets opens.

In the job pane on the right, tap [Create set].
The green button changes color and displays [Add].

Tap the green button to start scanning.

When the printer releases the original, insert the next original.

Tap the green button. The scan is added to the set.
Repeat this step until your set is complete.

Tap the [Finish set] tile to finish the set.

Result

The printer copies the set of originals.

Copy by set

252

Chapter 4 - Use the printing system

Summary of Contents for ColorWave 3800







































































































































































































































































































































































Search results

Summary of Contents for ColorWave 3800

Reviews:

Related manuals for ColorWave 3800

Brands by name

Popular brands

Canon ColorWave 3800, Operation Manual

Search results

Summary of Contents for ColorWave 3800

Reviews:

Related manuals for ColorWave 3800

Brands by name

Popular brands