Canon Color Bubble Jet BJC-8200, Service Manual

Page: 45 / 105

1.5.3 Replacing the cartridge/ink tank
When you open the cover of the printer with powered on, the carriage moves to the
cartridge replacement position (at the center of the printer). After replacing the BJ
cartridge or ink tank, when you close the cover or leave it open for 10 minutes, then
the carriage returns to the home position, at the right-most position, and starts
cleaning operations. (The beeper will sound before cleaning starts.)
1) Replacing the BJ cartridge/scanner cartridge
Raise the cartridge lock lever, remove the BJ cartridge or scanner cartridge. When
you install the scanner cartridge, keep the BJ cartridge, when removed from the
printer, in the BJ cartridge container (supplied with the scanner cartridge).
2) Replacing the ink tank
You can replace the ink tanks without having to raise the cartridge lock lever. Since
there are 6 separate ink tanks, one for each color, you can separately replace the ink
tank that has become empty.
The BJ cartridge may be very hot immediately after continuous operation.
If you open the printer cover when the cartridge is still hot, the carriage
will not move to the replacement position until it has cooled, for safety
purposes. In this case, leave the printer for several minutes and then
reattempt replacement.
3-7
BJC-8200 Part 3: OPERATION
OPERA
TION
CAUTION
B A C D E
Printed with No. 1 nozzle for black
(The same for each color)
Printed with No. 256 nozzle for black
(The same for each color)
Placement of even-numbered and odd-numbered nozzles
(The same for each color)
Placement setting for bi-directional print
Figure 3-4 Nozzle Check Pattern Print