manualshive.com logo in svg

Canon Color Bubble Jet BJC-8200, Service Manual

Share
Download
Canon Color Bubble Jet BJC-8200 Service Manual Download Page 29

2.3.3 Adjustable bushings supporting the carriage shaft

The adjustable bushings supporting the carriage shaft are adjusted and secured to
the printer frame so that the ideal gap, or head gap, between the BJ cartridge nozzle
and platen is maintained for best print quality.
The fixing screws are painted red to protect against careless removal. Do not loosen
the fixing screws.

2.3.4 Feed gear

Be careful not to touch the gears in the paper feed unit, especially the feed roller gear,
during disassembling or reassembly. Although covered, even slight damage to it could
affect paper feeding when printing at high resolution.

2-7

BJC-8200

Part 2: MAINTENANCE

MAINTENANCE

Figure 2-6 Adjustable Bushings Supporting the Carriage Shaft

Adjustable Bushing 
Supporting the Carriage 
Shaft

Adjustable Bushing 
Supporting the Carriage 
Shaft

Fixing Screw

Printer Frame

Fixing Screw

Figure 2-7 Precautions on Feed Gears

Summary of Contents for Color Bubble Jet BJC-8200










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands