Canon CN8x15, Operation Manual

Page: 153 / 176

E151
4. Operation in Full Mode
Info
Encoder: OFF
S/N
IND
ON
Info
CamSeri:
I/Fprior Cable
/ i
IND
ON
Info
CamSeri:
Mount
/ i
I/Fprior
OFF
3D
[ I-Gain ]
[Adj]
[ ]
MENU 1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
Specifying the Input Route for Command Signals from the Camera
There are two input routes for command signals from the camera: via the mount and via the 12-pin cable. This setting
specifies the input route for command signals from the camera. The default setting is “Mount,” and in this case command
signals received via the mount are given priority.
However, the command signals via the 12-pin cable are received automatically if no command signals are input via the
mount. When the “Cable” setting is selected, only command signals received via the 12-pin cable are used.
Press once and twice.
The display switches to the
Info screen
.
Press five times.
[I/Fprior] is underlined.
Press or .
Press left or right to switch the function {Cable} or {Mount}.
Initial Top Screen
Info Screen
Options (D) Mount Cable
Description Via mount Via 12-pin cable
(D): Default value
MENU
× 2
Info
× 5 or
1
2
3
Note: Set {Mount} when using the
auto focus function of the
camera . (For the camera models
that support the auto focus
function, contact your Canon
dealer.)