Canon CN8x15 Operation Manual Download Page 55

Page: 55 / 176

E53

3. Operation in Basic Mode

㧖

Iris

[ ]

[ I-Gain ]

Torque:

High

Comp:

Iris

[ ]

Comp:

Torque:

High

Close:

OFF

Iris

[ ]

Comp:

Close:

Torque:

High

[Trk]OFF

Shtl

A 1
A 2

IG: 50

Fr1P

[I-Tq]H

[Adj]

Iris Close Detection ON/OFF

The iris cannot be fully closed when correction is active and an extender (1.5×) is used. As a countermeasure, you can
specify a function to detect iris close and close the iris as needed.

Press once and

three times.

The display switches to the

Iris screen

Press

four times.

[Close] is underlined.
The previous or default function is
highlighted.

Press or .

Press left or right to switch the function
{ON} or {OFF}.

Initial Top Screen

Iris Screen

Options

(D)

OFF

Description

No close detection

Close detection

(D): Default value

× 3

Iris

[ ]

× 4

Note: With some cameras, iris

compensation may conflict

with iris control by the

camera, preventing correct iris

operation. If so, deactivate iris

close detection.

Note: Iris close is detected only

when iris compensation is

enabled.

*: Displayed when {Comp} is set to ON.

Summary of Contents for CN8x15

















































































































































































Search results

Summary of Contents for CN8x15

Reviews:

Related manuals for CN8x15

Brands by name

Popular brands

Canon CN8x15, Operation Manual

Search results

Summary of Contents for CN8x15

Reviews:

Related manuals for CN8x15

Brands by name

Popular brands