![background image](http://html.mh-extra.com/html/canon/canoscan-fs4000us/canoscan-fs4000us_user-manual_62790059.webp)
Adjusting the Scan Settings
57
1
2
3
4
5
FilmGet FS User’s Guide
Select an Output Resolution
The output resolution box sets the resolution at which an image is reproduced. Changing the output
resolution changes the image size (when the units are inch, cm or mm).
Image Size Settings
■
Image Size (Width and Height) Settings
The image size boxes set the width and height. Changing the image size changes the file size. The
size of the scan area selection frame will also change as a function of these settings.
• Changing the size of the scan area selection frame changes the image and file sizes in the scan settings
section by corresponding amounts.
Select a resolution from the list or input it directly
into the box. Input values are set by pressing the
[Tab]
key.
File Size (automatically
calculated)
Input a width directly into the box.
Change the units as required.
Input a height directly into the
box.