![background image](http://html.mh-extra.com/html/canon/canoscan-fs4000us/canoscan-fs4000us_user-manual_62790020.webp)
Before Scanning
18
1
2
3
4
5
FilmGet FS User’s Guide
Windows Setup
System Requirements
The computer you use to run FilmGet FS must meet the following minimum requirements. Check your
computer and install FilmGet FS onto the hard disk drive.
• FilmGet FS operation is not guaranteed on home-made or shop brand PCs.
• FilmGet FS is not compatible with NEC PC-9800/9821 series computers.
• Only one CanoScan scanner may be connected to a computer at a time.
• Please note that the system may become unstable because the computer’s energy saving mode
(sleep mode) is not supported.
Installing FilmGet FS
Install FilmGet FS according to the instructions in “2. Installing the Driver Software” of
“Chapter 2 Using the Scanner with Windows” in Getting Started supplied with the scanner.
Computer
USB connection: IBM PC-AT compatible computer with standard
USB configuration
SCSI connection: IBM PC-AT compatible computer with SCSI card
installed
Operating System
Windows 98, Windows 98 SE, Windows 2000, Windows Me
CPU
Windows 98: Pentium 133 MHz or faster
Windows 98 SE: Pentium 133 MHz or faster
Windows 2000: Pentium 133 MHz or faster
Windows Me: Pentium 150 MHz or faster
RAM
64 MB or more (128 MB or more recommended)
Display
High Color (16 bit) or better, 800 x 600 pixels or better
Interface
USB 1.1/SCSI II
Hard Disk Capacity
500 MB or more (1 GB or more recommended) available after
installing the application program
CD-ROM Drive
Required
Required Application
Program
Photoshop LE or other TWAIN-compliant application program