Canon C3000 - MultiPASS Color Inkjet Printer User Manual Download Page 61

Page: 61 / 260

2-36 Printing With the MultiPASS C3000

Chapter 2

MPC-3000—USERS MANUAL/V000/07-97

❍

Insert the sheet with the cloth side out (toward you) and

the open end up (away from the sheet feeder).

❍

Adjust the paper guide to the edge of the fabric sheet.

❍

In the Paper tab, select A4 for the Paper Size and select

Fabric Sheet for the Print Media.

❍

In the Graphics tab, select High for the Print Quality. You

may also want to select Fine mode.

❍

Start the print operation from your Windows application.

❍

Let the printed fabric sheet set for about one hour to

allow the ink to completely dry.

❍

When dry, peel the film backing from the printed fabric

sheet.

❍

Wash the printed fabric sheet for about three minutes

under lukewarm running water to remove extra ink.

❍

Hang the fabric sheet up to dry it again.

❍

Iron the dried fabric sheet with a clothes iron.

Dry and

then wash the

fabric sheet.

Set up

the MultiPASS

Printer Driver

for Windows.

Insert the

fabric sheet.

Summary of Contents for C3000 - MultiPASS Color Inkjet Printer





































































































































































































































































Search results

Summary of Contents for C3000 - MultiPASS Color Inkjet Printer

Reviews:

Related manuals for C3000 - MultiPASS Color Inkjet Printer

Brands by name

Popular brands

Canon C3000 - MultiPASS Color Inkjet Printer, User Manual

Search results

Summary of Contents for C3000 - MultiPASS Color Inkjet Printer

Reviews:

Related manuals for C3000 - MultiPASS Color Inkjet Printer

Brands by name

Popular brands