manualshive.com logo in svg

Canon BJC-50, User Manual

Share
Download
Canon BJC-50 User Manual Download Page 83

 

 

 

 

81

Preparing the printer for travel or storage

Follow the procedure below before you transport or store the printer.

1.

Press the 

POWER 

button to switch off the power. This secures the cartridge holder in the 

home position.

2.

On the right side of the printer, slide the power lock switch to the left position. This locks the 
printer off so it cannot be switched on accidentally during transportation.

The next time you use the printer, make sure that you slide the power lock switch to the right position 
before you press the POWER button to switch the printer on.

3.

If the optional sheet feeder is attached, remove it.

4.

If the BIFC-50 printer cable is connected, disconnect it from the printer and computer.

5.

If the AC adapter is connected, disconnect it from the printer and the power outlet.

6.

Make sure that the top cover is closed.

 

 

 

 

81

Summary of Contents for BJC-50














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands