manualshive.com logo in svg

Canon BJC-50, User Manual

Share
Download
Canon BJC-50 User Manual Download Page 117

 

 

 

 

108

Character sets

BJ mode

Each of the ten code pages, 437, 850, 852, 855, 857, 860, 863, 864, 865 and 869 can be changed to 
three character sets: Set 1, Set 2 and All Characters Chart. The code page tables shown on the 
previous pages are All Characters Charts. 

Each of the 10 code pages corresponds to an All Characters Chart. For the All Characters Chart, there 
are no control codes except for the space code at ASCII 32. All other ASCII characters are printable. 
The All Characters Chart is selected by using the ESC 

A 

or the ESC \ code.

Character Set 1 has control codes in two places: 

z

Between ASCII 0 and ASCII 31 (Hex OOh and Hex lFh) 

z

Between ASCII 128 and ASCII 159 (Hex 80h and Hex 9Fh) 

Character Set 2 has control codes in only one place, between ASCII 0 and ASCII 31 (Hex 00h and 
Hex lFh).

A control code is an unprintable character that the printer uses for printer operations such as line 
spacing or carriage returns.

 

 

 

 

108

Summary of Contents for BJC-50














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands