manualshive.com logo in svg

Canon BJC-50, User Manual

Share
Download
Canon BJC-50 User Manual Download Page 66

 

 

 

 

64

Replacing the battery pack

Follow this procedure to replace the battery pack. 

You can replace the battery pack at any time. You may want to purchase and carry extra battery packs 
for emergencies. However, please remember that new battery packs must be fully charged before you 
can use them. Before you travel, make sure new battery packs are fully charged.

You must also replace a battery pack after it is exhausted. The 

CHARGE/ERROR 

lamp will flash 

and the printer will beep six times when the battery pack becomes exhausted. After the battery pack is 
exhausted, ti cannot be recharged and used again.

HANDLE THE BATTERY PACK CAREFULLY BY FOLLOWING THE GUIDELINES 
DESCRIBED ON PAGE 21.

1.

Press the 

POWER 

button to switch the printer off.

2.

If the optional sheet feeder is installed on the printer, remove it.

3.

If the front cover is closed, open it.

4.

Push the battery pack release to the right. The battery pack will spring slightly out of the printer.

5.

Remove the battery pack from the printer.

 

 

 

 

64

Summary of Contents for BJC-50














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands