Canon AX-B2735W, Manual

Page: 30 / 60

4
Operating procedures
30
1
Charge the battery pack.
Charge the battery on the day of examination or on the previous day. Charge the
battery pack by inserting in the battery charger.
2
Attach the battery pack.
i)
Remove the battery cover.
• Press and hold the battery cover lock ( ) to release the lock, then lift up and pull out
the battery cover ( ).
4.1 Preparing to use the detector
Battery slowly discharges even if not in use. The battery pack may have expired
if it discharges immediately after being fully charged. You can purchase an
optional battery pack to replace an exhausted one.
Information
Place the detector on a flat surface before commencing the steps below.
Otherwise the battery pack may fall out while it is being attached.
Information
Cover lock Battery cover
Do not lift the cover more than approximately 60° while the claws are inserted
in the grooves.
Information
Claws
000_DIA-2019-002-E04_AX-B2735W.book Page 30 Friday, November 27, 2020 12:22 PM