manualshive.com logo in svg

Canon Arizona 2300 Series, Operation Manual

Share
Download
Canon Arizona 2300 Series Operation Manual Download Page 79

6.

Use the mouse to place the selected images within the rectangle that represents the media in the
Preview pane.

NOTE

Placement of images can be changed at any time by editing the batch job or by clicking
the + to the left of the batch job name, selecting one of the included images, and then
moving that image with the mouse.

7.

When the images are arranged the way you want them, click on the 

Back

 button to return to the

Print Job module and automatically add the Batch job to the Active job list.

NOTE

You can click on the + to the left of the name of a batch job in the Active Job list to see
the images it contains. Select an image to move it by dragging with the mouse. You
can also click the Edit Batch icon to open the editor to make changes to the layout and
add or remove images.

8.

Print the batch job by selecting it and then clicking the 

Start print 

icon.

Batch Mode Printing

Chapter 4 - Operate the Printer

79

Summary of Contents for Arizona 2300 Series





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands