Canon Arizona 2300 Series, Operation Manual

Page: 230 / 244

Radio Interference suppression (all countries except USA)
• Warning (CISPR22): This equipment is compliant with Class A. In a residential environment this
equipment may cause radio interference.
Flicker (EEA including Switzerland)
• This equipment may only be connected to mains connections with an impedance at 50 Hz of
Zsys = 0.277 ohm or less. In case it is observed that this equipment causes 'light flicker' to the
environment, contact the supply authority in order to verify if the mains network has lower
impedance than the one specified above.
FCC (USA)
• This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the User Documentation, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
• Do not make any changes or modifications to the equipment unless otherwise specified in the
User Documentation. If you make such changes or modifications, you could be required to stop
operation of the equipment.
• This equipment contains a certified modular transmitter. The transmitter’s FCC ID label is
located near the power rating label. The modular transmitter is located in the ink supply unit
and can only be accessed by a service technician.
ICES/NMB; Interference-causing equipment (Canada)
• CAN ICES-3 (A)/NMB-3(A)
Conformity declaration for Radio Equipment Directive; RED (EEA including Switzerland)
• Hereby Canon Production Printing declares that the printer is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU (RED). The product is CE-
marked to show conformance with applicable legal requirements.
Conformity declaration for Radio Law (Japan)
This end device contains a radio device which is already approved by MIC
AC-18004
for Radio
Law
Conformity declaration for Radio devices (USA and Canada)
• This equipment contains a certified modular transmitter. The modular transmitter is located in
Ink bay and can only be accessed by a service technician.
• The transmitter’s FCC ID is
U2P-3010120604
, the IC ID is
22117-3010120604
.
• The FCC ID and IC ID can be found in the online help of the print system.
Laser Safety (All countries)
• CDRH regulations
This machine is certified as a Class 1 Laser product under Radiation Performance Standard
according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser
230 Chapter 11 - Regulation Notices