background image

80

Convenient Features

This section describes features convenient during presentations and in other 
situations.

Temporarily Blacking Out an Image

Projection can be temporarily blanked after a presentation, or to divert the 
audience’s attention away from the screen.

Press the 

BLANK

 button to black out the image.

Press the 

BLANK

 button again to show the image.

• You can set the screen state while blacking out the image in the menu. 

(

P109

)

• The lamp remains illuminated while the image is blacked out.

Freezing the Picture

Projection can be temporarily frozen during computer operations that would be 
distracting, or to pause playback of video or animation.

Press the 

FREEZE

 button to freeze the moving image. The 

projector shows the following icon.
Press the 

FREEZE

 button again to return to the original display.

• It is also cancelled when the input signal is terminated.

Projecting a Test Pattern from the Menu

Even without any input signals, the projector can project a test 
pattern. Test patterns can be projected during installation to check 
how the projector is installed.
To project a test pattern, press the 

TEST PATTERN

 button on the 

remote control.
To stop test pattern projection, press the 

TEST PATTERN

 button 

again.

For details on projecting test patterns, see “Install settings” (

P97

) or “Displayed Test 

Patterns” (

P168

).

Remote control

Remote control

Screen

Remote control

Summary of Contents for 4K500ST






























































































































































































Reviews: