Canon 4K500ST User Manual Download Page 52

Page: 52 / 189

Installation Procedure

4K500ST

Maximum vertical (A) and horizontal (B) movement using lens shift

(reference values [cm (in)])

Image size (Dia.)

4096 x 2400

4096 x 2160

31 (12.2)

9 (3.5)

28 (11.0)

9 (3.5)

46 (18.1)

13 (5.1)

43 (16.9)

13 (5.1)

62 (24.4)

18 (7.1)

57 (22.4)

18 (7.1)

100

77 (30.3)

22 (8.7)

71 (28.0)

22 (8.7)

120

92 (36.2)

26 (10.2)

85 (33.5)

27 (10.6)

140

108 (42.5)

31 (12.2)

100 (39.4)

31 (12.2)

160

123 (48.4)

35 (13.8)

114 (44.9)

36 (14.2)

180

139 (54.7)

39 (15.4)

128 (50.4)

40 (15.7)

200

154 (60.6)

44 (17.3)

142 (55.9)

45 (17.7)

220

169 (66.5)

48 (18.9)

156 (116.9)

49 (19.3)

240

185 (72.8)

53 (20.9)

171 (67.3)

54 (21.3)

260

200 (78.7)

57 (22.4)

185 (72.4)

58 (22.8)

280

216 (85.0)

61 (24.0)

199 (78.3)

63 (24.8)

300

231 (90.9)

66 (26.0)

213 (83.9)

67 (26.4)

350

269 (105.9)

77 (30.3)

249 (98.0)

79 (31.1)

400

308 (121.3)

88 (34.7)

284 (111.8)

90 (35.4)

450

347 (136.6)

99 (39.0)

320 (126.0)

101 (39.8)

500

385 (151.6)

110 (43.3)

355 (139.8)

112 (44.1)

550

424 (166.9)

121 (47.6)

391 (153.9)

124 (48.8)

600

462 (181.9)

132 (52.0)

427 (168.1)

135 (53.1)

• (A) values are the approximate vertical lens shift distance from the central image

position within the supported lens shift range.

• (B) values are the approximate horizontal lens shift distance from the central image

position within the supported lens shift range.

• Watch projected images as you perform lens shift adjustment.
• When the image no longer moves, you have reached the limit of the lens shift range.

Summary of Contents for 4K500ST






























































































































































































Search results

Summary of Contents for 4K500ST

Reviews:

Canon 4K500ST, User Manual, Page: 52 / 189

Search results

Summary of Contents for 4K500ST

Reviews: