Canon 3288B002 User Manual Download Page 114

Page: 114 / 144

Setting Network

114

■

Projector Control

Click the [Projector control] button on the network setting screen.

The projector control screen appears.
Controlled items:
[Power]:

Turn ON/OFF the projector (

P42

P62

)

[Input]:

Select an input signal (

P47

)

[Aspect]:

Select an aspect ratio (

P55

)

[Image mode]: Select an image mode (

P61

)

[Blank]:

Blank out the image temporarily (

P64

)

[Mute]:

Mute the sound temporarily (

P65

)

[Auto setup]:

Perform the auto setup function (

P45

)

[Auto PC]:

Perform the auto PC function (

P50

)

• For [Input], [Aspect], and [Image mode], select an item and click the [Apply] but-

ton.

• Click the [Refresh] button to display the latest information.
• Click the [Back] button to return to the network setting screen.

Summary of Contents for 3288B002

















































































































































Search results

Summary of Contents for 3288B002

Reviews:

Related manuals for 3288B002

Brands by name

Popular brands

Canon 3288B002, User Manual

Search results

Summary of Contents for 3288B002

Reviews:

Related manuals for 3288B002

Brands by name

Popular brands