manualshive.com logo in svg

Canon 2711B019AB, Basic Operation Manual, Page: 207 / 242

Share
Download
Canon 2711B019AB Basic Operation Manual Download Page 207

11-14

Troubleshooting 

Clearing Jams

11

  Hold the toner cartridge by its handle.

The arrow (A) on the toner cartridge should be 

facing away from you and pointing down.

Do not open the drum protective shutter on the 
toner cartridge. Print quality may deteriorate if the 
drum surface is exposed to light or is damaged.

12

  Insert the toner cartridge into the 

machine as far as it will go.

A

Align the guide (A) on the left side of the toner 

cartridge with the groove inside the machine.

13

  Push down the toner cartridge to make 

sure it is properly set in the machine.

14

  Close the printer cover and lower the 

scanning platform.

Be careful not to get your fingers caught.

15

  Close the rear cover.

This operation is required only when <PAPER 

JAM/OPEN REAR COVER> appears on the 

display.

Be careful not to get your fingers caught.

Summary of Contents for 2711B019AB



















































































































































































































































Reviews:

No comments