manualshive.com logo in svg

Canon 2711B019AB, Basic Operation Manual, Page: 182 / 242

Share
Download
Canon 2711B019AB Basic Operation Manual Download Page 182

10-11

M

ain
tenanc

e 

Replacing the Toner Cartridge

6

 

Gently rock the toner cartridge several 

times to evenly distribute toner inside.

7

 

Hold the toner cartridge by its handle (A).

Do not open the drum protective shutter on the 
toner cartridge. Print quality may deteriorate if the 
drum surface is exposed to light or is damaged.

Always hold the toner cartridge by its handle.

8

 

Insert the toner cartridge so that the 

protrusion (A) on the right side of the 

toner cartridge fits into the guide (B) 

located on the right side of the machine 

and slide it down parallel to the guide.

9

 

Push the toner cartridge to make sure it is 

properly set in the machine.

10

  Hold the grip (A) on the right front side of 

the toner cover.

Summary of Contents for 2711B019AB



















































































































































































































































Reviews:

No comments