manualshive.com logo in svg

Canon 2711B019AB, Basic Operation Manual, Page: 185 / 242

Share
Download
Canon 2711B019AB Basic Operation Manual Download Page 185

10-14

M

ain
tenanc

e 

Replacing the Toner Cartridge

7

 

Gently rock the toner cartridge several 

times to evenly distribute toner inside.

8

 

Place the toner cartridge on a flat surface 

and pull the seal completely out.

If toner is adhered on the removed seal, be careful 
that your hands or clothes do not get dirty from 
touching the toner.

Do not pull the seal out at an angle.

9

 

Hold the toner cartridge by its handle (A).

Do not open the drum protective shutter on the 
toner cartridge. Print quality may deteriorate if the 
drum surface is exposed to light or is damaged.

Always hold the toner cartridge by its handle.

10

  Insert the toner cartridge so that the 

protrusion (A) on the right side of the 

toner cartridge fits into the guide (B) 

located on the right side of the machine 

and slide it down parallel to the guide.

Summary of Contents for 2711B019AB



















































































































































































































































Reviews:

No comments