Canon 2420B001 User Manual Download Page 25

Page: 25 / 227

Printing

Getting Started

Turn on the printer.

Press the camera’s

(Playback) button to turn on the
camera.

• The

button will light blue.

• A

icon will appear in the

LCD monitor if the connection is
correct (the displayed icons differ
according to the connected printer).

•

will display on movies.

Use the or button to select an image to print and
press the

button.

• The

button will blink blue and printing will start.

• You can also select an image by turning the control dial.

After you finish printing, turn off the camera and the printer and
disconnect the interface cable.

Always grasp the sides of the connector when disconnecting
the interface cable from the camera’s DIGITAL terminal.

Summary of Contents for 2420B001




































































































































































































































Search results

Summary of Contents for 2420B001

Reviews:

Related manuals for 2420B001

Brands by name

Popular brands

Canon 2420B001, User Manual

Search results

Summary of Contents for 2420B001

Reviews:

Related manuals for 2420B001

Brands by name

Popular brands