Canon 2420B001 User Manual Download Page 141

Page: 141 / 227

Playback/Erasing

139

Viewing Movies

(Movie Replay Control Panel)

Movies cannot be played in the index playback mode.

Display the movie file.

Use the or button to select a
movie.

Press the

button.

•

Images with a

icon are

movies.

•

The Movie Control Panel is displayed.

Play the movie.

Use the or button to select

Press the

button.

•

The movie will pause if you press the

FUNC./SET

button during playback.

It will resume when you press the
button again.

•

When playback ends, the movie
stops at the last frame displayed.
Press the

FUNC./SET

button to

display the movie control panel.

•

You can switch between showing/
hiding the playback progress bar by
pressing the

DISP.

button while playing a movie.

•

If playback was halted partway through in the prior viewing
session, playback will resume from the last frame displayed.

Volume Level
(Adjust it with the

button)

Movie Control Panel

Playback Progress Bar

Time movie was shot

Summary of Contents for 2420B001




































































































































































































































Search results

Summary of Contents for 2420B001

Reviews:

Related manuals for 2420B001

Brands by name

Popular brands

Canon 2420B001, User Manual

Search results

Summary of Contents for 2420B001

Reviews:

Related manuals for 2420B001

Brands by name

Popular brands