Video Configuration: Re
s
olution, Bit Rate and Frame Rate
48
Video Configuration: Resolution, Bit Rate and Frame Rate
With the following procedures you can set the video configuration used for recording clips on an SD card in the
camcorder. Select the combination of movie format, resolution/bit rate and frame rate settings that best matches
your creative needs. Available options for some settings may change depending on previous selections for other
settings. See the table following the procedures for a summary.
Selecting Internal Recording
By default, the camcorder is configured to allow internal recordings on an SD card. If the camcorder was set to
external recording-only mode, follow the procedure below to enable internal recording. For details about setting
the video configuration for recordings using an external recorder connected to the camcorder's SDI OUT
terminal (
m
only) or HDMI OUT terminal, refer to
Connecting to an External Monitor or Recorder
(
A
1
S
elect [Internal/External Rec].
>
[
3
!
Recording Setup]
>
[Internal/External Rec]
2 Touch [
v
Internal Rec Priority] and then touch [
X
].
Selecting the Movie Format
1
S
elect [Movie Format].
>
[
3
!
Recording Setup]
>
[Movie Format]
2 Touch [
¸
MP4] or [
XF-AVC] and then touch [
X
].
Selecting the Resolution and Bit Rate
1
S
elect [
¸
Re
s
olution] or [
Re
s
olution].
>
[
3
!
Recording Setup]
>
[
¸
Re
s
olution] or [
Re
s
olution]
2 Touch the de
s
ired option and then touch [
X
].
• The selected resolution and bit rate will appear at the right of the screen.
Operating modes:
