8
Installing the Software
EN
G
L
IS
H
z
A message asking for your confirmation to restart your computer may appear during the
installation process. If this message is displayed, follow the on-screen instructions and click
OK
.
The installation resumes from where it left off when your computer has been restarted.
z
We would appreciate it if you would take part in the
PIXMA Extended Survey Program
regarding the use of Canon printers. For details, refer to the on-screen instructions.
z
If the connection is not recognized, refer to “Cannot Install the MP Drivers” in the
User’s
Guide
on-screen manual.
Users in Asia
z
Scan Soft OmniPage SE can be installed only on an English operating system.
Information for Macintosh
z
Since Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier are not
supported, do not connect the machine to these.
z
Do not remove or insert the USB cable during installation, as this may result in the computer
or machine not operating normally.
z
Before installing the software, disable all anti-virus programs and automatically loading
programs or remove them from your system folder.
When using Mac OS X v.10.2.8 to v.10.3.x:
z
Before using the Operation Panel on the machine to save originals scanned from the Platen
Glass or the ADF to the computer, it is necessary to select
MP Navigator EX 1.0
or
MP
Navigator EX 1
as the launch application on Image Capture under
Applications
. For details,
refer to “Scanning Images” in the
User’s Guide
on-screen manual.
When using Mac OS X v.10.2.8 to v.10.3.3:
z
Restarting the computer while connected to the machine may cause the machine not to be
detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the
machine off then back on again.
Users in Asia
z
To install the
User’s Guide
on-screen manual in a language other than the installed one,
double-click the
Manual
folder in the
Setup CD-ROM
,
Canon
folder, and then copy a
language folder to your hard disk.