Canon 1750, Copying Manual

Page: 71 / 106

Erasing Shadows/Frame Lines (Frame Erase) 3-16
Ad
v
anced
Co
p
y
ing
F
e
at
ur
es
3
4
Press [-] or [+] to set the frame erase widths.
NOTE
•
The default settings are '1/8" (4 mm)' for each side and '3/8" (10 mm)' for the center.
You can adjust the frame erase width to between 1/16" and 1 15/16" (1 mm and
50 mm).
•
To enter values in millimeters, press [mm]. (See Chapter 3, "Configuring the Machine's
Basic Settings," in the
Reference Guide .)
●
If you want to set the same width for all four borders:
3
Select the size of the bound
original when it is open
➞
press
[Next].
IMPORTANT
You can set the Book Frame Erase
mode only for the original paper sizes
shown on the touch panel display.
NOTE
To select the paper size in A or B
series, press [A/B-size].
❑
Press [Center] and/or [Sides]
➞
press [-]
or [+] to set their respective frame erase
widths
➞
press [OK].