Canon 1418C025 User Manual Download Page 426

Page: 426 / 466

Viewing User's Guide

19Y4-07W

Marks

Cautions regarding safety, restrictions and cautions regarding the handling of the machine, useful tips, and

other information are indicated using the marks below.

Indicates a warning concerning operations that may lead to death or injury to

persons if not performed correctly. To use the machine safely, always pay
attention to these warnings.

Indicates a caution concerning operations that may lead to injury to persons if not

performed correctly. To use the machine safely, always pay attention to these
cautions.

Indicates an operation that must not be performed. Read these items carefully,

and make sure not to perform the described operations.

Indicates operational requirements and restrictions. Be sure to read these items

carefully to operate the machine correctly, and avoid damage to the machine or
property.

Indicates a clarification of an operation, or contains additional explanations for a

procedure.

Indicates useful functions or tips for using the machine.

Keys and Buttons Used in this Manual

Keys on the operation panel and buttons on the computer display appear in the following notation:

Type

Example

Keys on the operation panel

Settings displayed on the operation panel

Buttons and other text interfaces displayed on the computer display [Preferences]

Screens Used in This Manual

Depending on the operating system you are using, the appearance of the displays used in this manual may

slightly differ from the actual displays. Also, the appearance of drivers and software may differ depending on

their version.

Appendix

420

Summary of Contents for 1418C025



















































































































































































































































































































































































































































































Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands

Canon 1418C025, User Manual

Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands