Canon 0640B002 Instructions Manual Download Page 26

Page: 26 / 110

Chapter 2

Preparation Before Use

USB Connections

Connect the scanner to the computer.

To connect the scanner with a USB interface cable, you will need the following items

that are not included in the package.

●

USB interface card

Use an extended USB interface card that is compatible with Hi-Speed USB 2.0 and

operationally tested by Canon.

◆

USB 2.0 Interface Cards

Be sure to use one of the recommended USB 2.0 interface cards when
connecting the scanner with a USB interface cable. The recommended USB 2.0
interface cards are listed below.

Recommended USB 2.0 interface cards

Manufacturer:

Adaptec

Product:

USB 2 Connect 2000LP (AUA-2000)
USB 2 Connect 3100 (AUA-3100LP)
USB 2 Connect 5100 (AUA-5100)
USB 2 Connect for Notebooks (AUA-1420)

●

Be sure to follow the installation procedure in your computer’s operation manual

when installing the USB 2.0 interface card to your computer.

●

Use the most recent USB 2.0 driver provided by Microsoft.

●

Windows NT operating systems do not support USB. Use a SCSI cable to connect

the scanner to computers with Windows NT operating systems.

●

Use a USB hub that supports USB 2.0 if you need to use a USB hub.

●

This scanner has passed the Hi-Speed USB 2.0 verification test. However, it may not

function properly even when Hi-Speed USB 2.0 is built-in a computer as standard.

●

Scan speed may slow down when Hi-Speed USB 2.0 is not supported.

Important

Summary of Contents for 0640B002















































































































Search results

Summary of Contents for 0640B002

Reviews:

Related manuals for 0640B002

Brands by name

Popular brands

Canon 0640B002, Instructions Manual

Search results

Summary of Contents for 0640B002

Reviews:

Related manuals for 0640B002

Brands by name

Popular brands