Canon 0564B001 Basic Manual Download Page 128

Page: 128 / 214

11-1

Maintenance

Maintenance

Cleaning the Machine

Note the following before cleaning
your machine:
– Make sure no document is stored in

memory, then turn off the main
power switch and disconnect the
power cord.

– Use a soft cloth to avoid scratching

the components.

– Do not use tissue paper, paper

towels, or similar materials for
cleaning; they can stick to the
components or generate static
charges.

CAUTION

Never use volatile liquids such as thinners,
benzene, acetone, or any other chemical cleaner to
clean the machine. These can damage the
machine components.

Exterior

Turn off the main power switch
and disconnect the power cord.

Wipe the machine’s exterior with
a clean, soft, lint-free cloth
dampened with water or diluted
dishwashing detergent solution.

Wait for the machine to dry, then
reconnect the power cord and
turn on the main power switch.

Summary of Contents for 0564B001























































































































































































































Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands

Canon 0564B001, Basic Manual

Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands