Canon 0564B001 Basic Manual Download Page 145

Page: 145 / 214

11-18

Maintenance

■

Option B: Volume Box Return

We encourage you to use this option as a more efficient way to ship cartridges.

●

Place as many cartridges as possible into one box.
Carefully seal the box with tape;
or

●

Call

1-800-OK-Canon

to receive your free eight cartridge collection box.

■

Option A-2: Multiple Box Return

We encourage you to use this option as a more efficient way to ship cartridges.

●

Complete Option A-1.

●

Bundle multiple cartridge boxes together securely with tape.

Please be sure that the shipment does not exceed UPS specifications.

Maximum weight = 70 lb. (31.8 kg)

Maximum length = 108" (2,743 mm)
Maximum girth ( 2 x width + 2 x height) = 130" (3,302 mm)
If your shipment exceeds the above limits, please call

1-800-OK-Canon

for special

shipping information.

Please Note:

Do not send

defective cartridges for replacement.

Defective cartridges under warranty should be exchanged by an authorized dealer
or service facility as provided in the warranty.

Summary of Contents for 0564B001























































































































































































































Search results

Summary of Contents for 0564B001

Reviews:

Brands by name

Popular brands

Canon 0564B001, Basic Manual

Search results

Summary of Contents for 0564B001

Reviews:

Brands by name

Popular brands