110
2. To adjust, loosen the lockring and turn adjuster until the
specified freeplay is reached. Tighten the locknut
securely and reposition the boot when finished. If the
specified freeplay can not be adjusted at the lever,
adjust the inline cable adjuster.
3. To adjust the inline cable adjuster, loosen the locknut
and turn the adjuster in direction (a) to decrease
freeplay, direction (b) to increase available freeplay at
the lever. Tighten the locknut securely after adjusting
the clutch cable. Re-adjust freeplay at the lever when
finished.
Clutch lever position (hydraulic)
The lever position of vehicles equipped with a hydraulic
clutch can be adjusted to suit individual hand sizes.
CAUTION
The adjusting screw can be turned within certain
limits. Do not use excessive force when turning the
screw.
1. To adjust, turn the adjusting screw clockwise to reduce
the distance between the lever and the handle grip; turn
1. Adjuster
2. Lock nut
a. Decrease freeplay
b. Increase freeplay
1
2
b
a
Summary of Contents for 2002 Blaze
