Cannon imageRUNNER 5050, Support Manual

Page: 229 / 268

List of Error Messages 3-91
3
T
rou
b
lesh
o
o
ti
ng
# 851
Cause 1 There is insufficient memory remaining in the system.
Remedy Check the system's available memory, and delete any unnecessary documents
stored in inboxes. (See Chapter 2, "Introduction to the Mail Box Functions" in
the
Copying and Mail Box Guide .)
Cause 2 The machine's memory is full.
Remedy Erase unnecessary documents and documents with errors from memory to
increase the amount of available memory. (See Chapter 2, "Introduction to the
Mail Box Functions," in the
Copying and Mail Box Guide , and Chapter 6,
"Receiving Documents," in the Sending and Facsimile Guide .)
Cause 3 The scanned document cannot be stored because there are more than 2,000
documents in the specified inbox.
Remedy If there are a large number of documents, delete the unnecessary ones from
the specified inbox. (See Chapter 2, "Introduction to the Mail Box Functions" in
the
Copying and Mail Box Guide .)
# 852
Cause An error occurred because the main power switch was turned OFF while a job
was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job
again, if necessary. (See "Main Power and Control Panel Power," on p. 1-16.)
# 853
Cause 1 When trying to print a large number of pages, the job is not performed due to
insufficient memory resources.
Remedy Reduce the number of pages to print, or perform the print job again when no
other jobs are reserved.
Cause 2 The job could not be processed, because it was canceled from the printer driver
while the print data was being sent to the machine.
Remedy Try printing again.