List of Error Messages
3-86
3
T
rou
b
lesh
o
o
ti
ng
Remove the paper from the booklet tray.
Cause
Prints from the previous job remain in the Booklet tray of the optional Saddle
Finisher-AD2.
Remedy
Remove the prints from the Booklet tray. Printing automatically resumes.
Replace toner cartridge.
Cause
Printing is not possible because the toner has run out.
Remedy
Replace the toner cartridge. (See "Replacing the Toner Cartridge," on p. 2-45.)
Place the original on the platen glass.
Cause
The specified mode requires that the original be placed on the platen glass, but
there is no original on the platen glass.
Remedy
Place the original on the platen glass.
Remove the original from the platen glass.
Cause
An original remains on the platen glass.
Remedy
Remove the original from the platen glass, and place the new original.
Remove the original from the feeder.
Cause
The machine cannot scan your original using the feeder. An original is placed in
the feeder and on the platen glass.
Remedy
Remove the original from the feeder.
Original scanning area (thin glass strip) is dirty.
Cause
The feeder's scanning area is dirty.
Remedy
Clean the feeder's scanning area. (See "Manual Feeder Cleaning," on p. 2-52.)
Summary of Contents for imageRUNNER 5050
