Cannon Digi-Troll IV, Owner'S Manual

Page: 17 / 24

17
The Series Hook Up Option
The series hook-up option allows one or more
slave Digi-Troll IV’s to bottom follow by chaining
them in series to a single master Digi-Troll IV.
Each Digi-Troll IV can be programmed
independently to operate at different distances off
the bottom. Attach the interface cable (optional)
from the DATA OUT port on the
master to the
DATA IN port of the slave . Use the DATA OUT
ports of the slave to hook up additional slave unit
in the same manner.
Digi-Troll IV Factory Settings
Your Digi-Troll IV was shipped with the
following factory settings so that you can use your
downrigger immediately without further
programming.
Depth memory settings
#1 25 feet
#2 50 feet
#3 100 feet
#4 150 feet
#5 200 feet
Bottom Following
Maximum Bottom Following depth 50 feet
Distance of weight off the bottom 10 feet
Sensitivity 6 feet
Cycling
Cycle Time 15 seconds
Cycle Depth 5 feet
Zero Depth -2 feet
Cable Type 400 feet
Up Speed Fast
Down Speed Fast
Data Out
Data In
Transducer Input
PIC Control Knob
OPE
R
A
T
ING &
PROGRAMMI
NG
AnglingOutpost.com 1-888-356-5022
AnglingOutpost.com 1-888-356-5022