Cannon Digi-Troll IV, Owner'S Manual

Page: 14 / 24

14
Programming the Digi-Troll IV
The Digi-Troll IV contains six menus that
enable you to program and customize its
operation. Any changes made using the menu
system are automatically saved in permanent
memory when the downrigger is turned off.
The
MENU key is used to enter each of the
menus starting from the default screen
(referred to as the
depth screen ). Sub levels,
if any, are entered using the RCL key.
Additionally, pressing the RCL key when in
the depth screen allows you to display,
change and activate up to five programmable
weight depths.
Using Programmable Weight Depths
The Digi-Troll IV allows you to program
and store up to five depths for quick
movement of the weight without having to
manually hold the
DOWN key until the
desired depth is reached. When in the
(default) depth screen, simply press the
RCL
key until the required depth memory is
displayed. For example, pressing the
RCL
key three times will result in a display similar
to that shown on the opposite page. Use
UP
or DOWN keys to change the depth if desired
and press the RUN key to move the weight to
that depth.
The Menu System
The table at right summarizes the Digi-Troll
IV's menu system in the order of occurrence.
While programming, the UP key is used to
increase the value and the DOWN key is used to
decrease the value. Remember during
programming, if there is no activity on the keypad
for 10 seconds, the menu reverts back to the
default
depth screen .
MENU LETS YOU ADJUST
Bottom
Following Maximum depth where the weight would
stop regardless of the bottom depth
Distance of the weight off the bottom
Sensitivity of the weight adjustment due to
changes in the bottom depth and boat
motion caused by wave action
Cycling Cycle Time; the pause time between up/
down movement of the weight
Cycle Depth; width of the cycling depth
band . The weight will cycle between
Current Depth and
[ Current Depth - Cycle Depth ]
Zero Depth Allows you to define the distance from the
boom to the water surface so that the depth
of the weight will be displayed as
0 at the
water surface. When the weight is raised
above the water surface, the depth will be
displayed as negative.
UP speed
Speed of weight when traveling in the UP
direction.
DOWN
speed
Speed of the weight when traveling in the
DOWN direction.
Bottom
Depth Continuously displays the bottom depth.
Note : This menu will not time-out in 10
seconds. Press MENU key to exit.
OPE
R
A
T
ING &
PROGRAMMI
NG
AnglingOutpost.com 1-888-356-5022
AnglingOutpost.com 1-888-356-5022