Cannon DIGI-TROLL 10, Owner'S Manual

Page: 10 / 40

10
www.cannondownriggers.com
BOOM END PULLEY
Telescopic Boom
1) Remove boom end assembly from hardware bag.
2) Remove #8 self tapping screw from hardware bag.
3) Insert boom end post into end of the small tube of the
telescopic boom assembly. (Figure 9)
4) Align hole in boom post with hole in small end tube.
(Figure 10)
5) Secure boom end with #8 screw as shown. Tighten
with Phillips head screw driver.
FIGURE 9
FIGURE 10
Installation