Cannon DIGI-TROLL 10, Owner'S Manual

Page: 15 / 40

15
www.cannondownriggers.com
USING THE INCLUDED POWER LOSS MANUAL
CRANK HANDLE
In case of a dead battery, your downrigger comes
equipped with a power loss manual crank handle. This
handle allows for the retrieval of your weight should you
lose power or have an electrical failure. To utilize the
handle follow the below steps.
WARNING: LOOSENING OR REMOVING THE
CLUTCH KNOB WILL RELEASE THE SPOOL AND
ALLOW IT TO RUN FREE. MAKE SUIRE YOU HOLD
THE SPOOL BEFORE REMOVING THE CLUTCH
KNOB.
1) Unplug downrigger and secure reel.
2) Rotating clockwise, remove the clutch knob.
(Figure 26)
CAUTION: Take care when removing the clutch
knob over open water.
3) Install the handle’s hex pattern to match the hex pat-
tern on the spool. Once installed, you can start cranking
up your weight. (Figure 27)
6) Terminate cable as previously described.
Your Digi-Troll is now Intellitroll compatible. Once you
attach your Intellitroll to the cable per the instructions
included, your Digi-Troll 10 will display the data on it’s
screen. The Digi-Troll 5 will pass this data on to the
Cannonlink for display on your Humminbird fish finder.
FIGURE 24
FIGURE 25
Installation
FIGURE 26
FIGURE 27