Cannon DIGI-TROLL 10, Owner'S Manual

Page: 25 / 40

25
www.cannondownriggers.com
Units Menu
This menu lets you switch between English and Metric units.
Press the Menu six times from the depth screen or once from the Line On Reel Screen
Un/Coated Menu
This menu lets you switch between Cannon coated and uncoated cable. This setting is important as well in deter-
mining accurate line out.
Press the Menu seven times from the depth screen or once form the Units screen.
Bottom Depth Display
(Cannonlink or Optional Transducer Required)
This feature allows your downrigger to be used as a depth finder by continuously displaying the bottom depth. The
unit needs to be hooked up to either the optional Digi-Troll transducer or a Humminbird fishfinder (1100, 900, 700,
or Matrix Series) via the Cannonlink module. If hooked up to Cannonlink, the sonar display will match the fishfind-
ers depth. The connection to the Cannonlink or transducer will need to be installed prior to power up of the down-
rigger.
Sonar Offset Menu
This menu lets you set an offset for your sonar value. In comparison with your Humminbird or other transducer, if
your Digi-Troll transducer is mounted a foot or two of difference in height you can account for that difference.
Press the Menu eight times from the depth screen or once from the Un/Coated screen.
Getting Started