Cannon CMRV-5000 Instruction & Operation Manual Download Page 89

Page: 89 / 130

CANNON

Mini-Rotary Viscometer

CMRV-5000

Instruction & Operation Manual

Version 1.0b—August, 2011;

CANNON

Instrument Company

2139 High Tech Road • State College, PA • 16803 • USA

Interface options

The profile library

The profile library consists of two types of profiles—ASTM-defined

profiles and User-defined profiles.

Click the "down" arrow ( ) to display the list of available profiles.
Then click the desired profile to select it and display the Time, Tempera-

ture and Tolerance data for each defined point of the profile.

Managing profiles

Time/Temperature/Tolerance data from the Profile Designer window

Click the

Print Selected Profile

button to print the currently-displayed

profile.

Click the

Graph Selected Profile

button to display a Profile Graph

plotted from the defined points of the profile.

Click the

Delete Selected Profile

button to delete the currently-

displayed User Defined Profile (ASTM Standard Profiles cannot be

deleted from the Library).

Summary of Contents for CMRV-5000



































































































































Search results

Summary of Contents for CMRV-5000

Reviews:

Related manuals for CMRV-5000

Brands by name

Popular brands

Cannon CMRV-5000, Instruction & Operation Manual

Search results

Summary of Contents for CMRV-5000

Reviews:

Related manuals for CMRV-5000

Brands by name

Popular brands