Cannon CMRV-5000 Instruction & Operation Manual Download Page 6

Page: 6 / 130

CANNON

Mini-Rotary Viscometer

CMRV-5000

Instruction & Operation Manual Version

1.0b—March, 2011;

CANNON

Instrument Company

2139 High Tech Road • State College, PA • 16803 • USA

Cooling Profiles ......................................................................................................................................... 79

The Profile Designer ............................................................................................................................79

Opening the Profile Designer ................................................................................................80

Interface options .....................................................................................................................81

Managing profiles ........................................................................................................................ 81

Using the Profile Editor..........................................................................................................82

Editing points ................................................................................................................................ 83

Deleting points ............................................................................................................................. 83

Cooling profile limitations ......................................................................................................................... 84

Profile Designer test parameters .........................................................................................................84

Changing test parameters ................................................................................................ 85

MRV DATA TABLE ANALYSIS

Configuring the MRV Data Table ............................................................................................. 88

ERROR LOG TABLE ANALYSIS

Configuring the Error Log analysis ........................................................................................91

EXPORT ANALYSES

Configuring the Port Export analyses ...................................................................................96

USING THE DATABASE MANAGER

101

Archiving old data ............................................................................................................... 102

Changing the database directory .................................................................................... 102

Importing archived data ...................................................................................................... 103

Repairing/compacting the database ................................................................................... 103

Exit ................................................................................................................................................................................ 103

WARRANTY/RETURN INFORMATION

105

Products limited warranty ................................................................................................................ 105

Reagent and chemical warranty ....................................................................................................... 105

APPENDIX A — TROUBLESHOOTING

107

Instrument status window not updating ............................................................................. 107

The CMRV is not heating properly ................................................................................ 107

The Yield/Viscosity lights on the CMRV Controller front panel are blinking rapidly. . 107

CMRV cooling/temperature control problems ................................................................. 107

Summary of Contents for CMRV-5000



































































































































Search results

Summary of Contents for CMRV-5000

Reviews:

Cannon CMRV-5000, Instruction & Operation Manual, Page: 6 / 130

Search results

Summary of Contents for CMRV-5000

Reviews: