Enter 257 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
UDSI
barcode to tailor Code ID for JP Post to your needs.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the
appendix to scan hexadecimal value barcodes representing the desired string
which has to be at most 2 characters in length. For instance, to set its Code ID to
be “JP”, scan
4, A, 5,
and then
0
to assign the specified hexadecimal value
“4A50”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
8-21.
Matrix 25
8-21-1.
Enable/Disable Matrix 25
Scan the appropriate barcode to determine whether or not to enable Matrix 25.
8-21-2.
Configure Length Qualification
With length qualification the scanner will filter out the inappropriate barcodes whose lengths are out
of range. Scan
Min
barcode to specify the minimum length which the valid code at least has to be;
Fixed
barcode requires the scanned code length to necessarily agree with certain fixed number
;
Min/Max
barcode is to confirm whether the barcode length falls in between maximum and
minimum. However, to make this parameter work effectively, you have to configure the length scale
simultaneously. Please refer to
Section 8-21-4
for more details about configurations of the length
scale.
*45401*
Enable
45401
*45400*
Disable
45400
