Enter 130 End
*/$%ENTR* *ZEND*
Setting up your Operation Modes
7
7-2-3-18.
Set Postamble Code
In the process of transmitting data, Postamble Code is appended to both the suffix code
and barcode data as a user-defined string to format the output data. However, Postamble
Code not simply works like Suffix Code to better format the transmitted messages, but, to
precisely describe it, expects to emulate line terminators to break transmission line.
Consequently, it is strongly suggested to associate this configurable parameter with
equivalent ASCII code value for line terminators. Please follow the below steps to
configure Postamble Code.
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
PostambleChar
barcode to configure Postamble Code.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the
appendix to scan hexadecimal value barcodes representing the desired string
which has to be at most 2 characters in length. For instance, to set postamble
code to be <CR><LF>, scan
0, D, 0,
and then
A
to assign the specified
hexadecimal value “0D0A”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
*B4EE3*
PostambleChar
B4EE3
(Length: 2 digits)
