19
Loop 1: Loop 1 is always functioning on the ICT 801. (No indicator light on the circuit
board.)
L1 Freq.: Select either 7K or 10K signal for Loop 1. The default setting is 7K.
L1 Signal: Select either Indoor or Outdoor mode for Loop 1. The default setting is Indoor.
Saturation: When lit, indicates Loop 1 transmitter output saturation. Loop saturation
exists when the signal has reached maximum output level, which is caused by excessive
loop size, excessive resistance, or poor connections.
Battery Fault: When lit, indicates that the 12VDC backup battery is either not installed or
not working properly.
Programming the ICT 801 Transmitter
On first time power up, the LED system indicator lights will display the following default
settings.
Once the transmitter has been programmed, the settings will remain in the system
memory. To program the transmitter:
1. Press and hold the S1 button for approximately 4 seconds until: