CANGAROO HB-320E, Manual

Page: 15 / 46

COMPONENTS OF THE APPLIANCE
ELECTRIC SPECIFICATIONS

PARTS OF THE APPLIANCE - SEE FIGURE PD:
1. Handle; 2. Top Cover; 3. Accessories tray; 4. Central Post; 5. Bottle holder; 6. Bottle tray; 7. Adapter ring; 8.
heating basket; 9. Heating base (bottle warming); 10. Tongs for bottles and small accessories; 11. Measuring cup
(120
мml); 12. Heating base (sterilizer); 13. Display; 14. Buttons.

CONTROL PANEL - SEE FIGURE CP:
W
–Warming icon;
S
– Sterilizing icon;
H
– Fast warming icon;
M
– Mode button;
D
– Decrease button;
I
–
Increase button; P
– Power button.
1. Voltage: 220 - 240V~
2. Frequency: 50Hz/ 60Hz
3. Power: Sterilizing compartment 500W; Bottle warm compartment: 400W
26. NEVER IMMERSE THE APPLIANCE IN WATER!
27. Whe the product is not being used, store it in a dry cool place, away from
direct heat sources, water or the reach of children.
28.
The product is tested according to and complies with the requirements of EU
Standards: EN55014-1:20016+A1:2009+A2:2011, EN 55014-2:2015; EN 61000-3-
2:2014; EN 61000-3-3:2013.

Before First use:
We recommend that you run a sterilizing cycle to ensure that the appliance is clean prior to sterilizing the feeding
bottles and accessories for the first time.

How to assemble the inner accessory:
1. There are 4 elongated holes on the bottle tray.
2. Screw the bottle holders (5) on these elongated holes, screwing them anti-clockwise or clockwise.
3. Screw the central post (4) clockwise in the centre of bottle tray (6).
4. Place the accessory tray (3) on top of the central post (4).
Note : If you find it difficult to screw the bottle holder on the elongated holes, we suggest to sterilize all the
accessories before assembling.
BEFORE STARTING TO USE THE PRODUCT
USE

WARNING! If you do not clean the base of the sterilizer at least twice a week from lime scale, as
described in
“GUIDELINES FOR MAINTENANCE AND CLEANING”, the product will not work normally!

We recommend you the use of boiled or filtered water in order to reduce the risk of limescale deposition.

This sterilizer can fit up to 6 standard neck bottles from any brand and 4 wide neck bottles, as well as other
baby feeding items, for e.g. feeding bowl, cups and spoons.

The product can be used and for sterilizing accessories, which come into contact with milk
– such as breast
pump.

The appliance is multifunctional and except as a sterilizer, it can work as a bottle warmer, food warmer, steam
cooker of eggs and vegetables/ fruit, thawing breast milk.
A. Sterilization:
1.Pour 100ml water into the
sterilizer’s heating base (12).
2.Place the bottle tray in the base of the sterilizer. Place the washed bottles upside down on the bottle holders.
3.Place the central post (4) on the bottle tray.
4.Fix to it the small
accessories’ tray (3). Place in it the nipples, their caps, soothers and other small items.
5.Place the top cover (5). Plug the supply cord of the device into the mains and turn on the power button. A
flashing will appear. Press the mode selection button once until the sterilize symbol displays and flashes. The
default sterilizing time is 10 minutes. You can adjust the sterilizing time with the
“+” or “-” button. The range is
from 1 minute to 10 minutes. Press
“+” or “-” once to change with 1 minute. Once you set up the sterilize time,
the sterilizing symbol will flash 5 times and the device will start working automatically. When the sterilization
cycle has been completed, the device will beep and the display will turn itself off to notify the user.
14