
28
28
28
28
28
INSTALLATION : "ELECTRICAL CONNECTION"
INSTALLATION : "ELECTRICAL CONNECTION"
INSTALLATION : "ELECTRICAL CONNECTION"
INSTALLATION : "ELECTRICAL CONNECTION"
INSTALLATION : "ELECTRICAL CONNECTION"
THESE INSTRUCTIONS ARE OF PARTICULAR INTEREST TO INSTALLERS.
The mains electricity supply connected to the appliance should comply with the norms in
force in the country of installation.
Candy declines all responsibility if the above compliance is not observed.
Connection to the mains electricity should be through a plug with an earth terminal, or
through an intermediary switching device with a gap between contacts of at least 3 mm.
The power supply unit must be protected by appropriate fuses and use cables of a large
enough cross section to provide a normal supply to the appliance.
CONNECTION :
CONNECTION :
CONNECTION :
CONNECTION :
CONNECTION :
The oven is fitted with a power supply cable for connecting exclusively to a voltage of
220/240 V~ across the phases or across phase and neutral.
Connection must be carried out in compliance with the diagram on the next page, having
first checked:
. the supply voltage indicated on the meter,
. the circuit breaker system.
The earth wire (green/yellow) must be connected to the earth both of the oven and of the
power supply system.
Caution :
. Check the continuity of the earth installation before connecting.
. The manufacturer will not be liable for any accident or the possible
consequences that may arise from the use of the oven which has not been
earthed correctly or connected to an earth with defective continuity.
NOTA :
NOTA :
NOTA :
NOTA :
NOTA :
do not forget that the oven may require after sales services. Position the plug outlet
so that the oven can be removed from its space while still connected to allow easy servicing.
Power supply cable :
Power supply cable :
Power supply cable :
Power supply cable :
Power supply cable :
if the power supply cable has to be changed, please have this done by
our after sales technicians or by qualified engineer.