32
32
32
32
32
•
CLOCK
The time of day should be set when the oven is connected to the power supply. Before the oven is
connected to the power supply, or after a power cut, the symbol Auto flashes.
. Press buttons "1" and "2" at the same time, and then release them,
. Press the regulator buttons "5" or "6" to set the desired time.
•
TIMER
The timer can be used on its own, as a reminder. A bleep will sound when the set time is
up.
. Press button "1" and then the regulator buttons "5" or "6" to set the desired time.
The symbol will appear. When the buttons are released, the time of day will be displayed.
When the set time is up, an alarm will sound. To stop it, press button 1, 2, 3 or 4.
Before starting a cooking or pyrolyser cycle in the oven, you have to set on
the timer, either the manual position (cooking mode) or a cycle time with or
without start delay.
• MANUAL USE
Cooking starts immediately. When you required, the oven can be switched off simply by turning the
knobs back to the off position.
. Check that Auto symbol is not displayed : if necessary, press button "4" to make the
"Auto" symbol disappear.
. Select a temperature by turning the thermostat control knob.
. Position the selector control knob on required cooking mode.
The indicator lights come on. Cooking will then start immediately.
To stop the oven working, turn the selector and thermostat knobs back to off position.
THE ELECTRONIC TIMER
THE ELECTRONIC TIMER
THE ELECTRONIC TIMER
THE ELECTRONIC TIMER
THE ELECTRONIC TIMER
Auto symbol :
.
when this is not lit up,
the
programmer is in the manual po-
sition.
.
When it is lit up
, it indicates
that a programme has been set and
is running.
.
When it is flashing
, the selected
programme has finished and the
programmer will still be on the
automatic setting. Return it to the
manual position or select a new
programme.
•
PRESENTATION
Cooking symbol :
. when this is lit up, the oven
is in the cooking position
. when it goes out, cooking
has finished.
1:
independent timer/alarm
2:
time
3:
end of time
4:
manual position
5 & 6:
regulation of all functions
("-" and "+")