Heater d splay
Fault
Act on
F0
Fc
Ft
FE
Fb
FU / FJ
FA
FC / Fd
Fr
If error has occurred d sconnected and connect aga n the cooktop to the power supply. If error pers st,
call after-sales serv ce. If error appears suddenly n a normal operat on, call after-sales serv ce.
Touch control software error.
Wa t unt l temperature goes down, Cook-top w ll be recoverd when temperature reaches a normal
value. When the message d sappears, the hob may be used aga n.
Touch control zone s too hot
and has turned off all the
heaters.
Wa t unt l temperature goes down. If message pers st when temperature reaches an env ronment
value, call after-sales serv ce.
Touch control temperature
sensor can be damaged.
Wa t unt l temperature goes down. If message pers st when temperature reaches an env ronment
value, call after-sales serv ce.
Touch control temperature
sensor can be damaged.
See f cook-top s mounted correctly. Be sure that keys touch correctly the glass surface.
Excess ve sens t v ty
on any key.
Th s error s a keyboard auto-check. It d sappears when autocheck return to secure value. If error
pers st, call after-sale serv ce.
Secur ty keyboard error
Th s error s a software auto-check. It d sappears when auto-check return to secure value. If error
pers st, call after-sale serv ce.
Secur ty software error
Th s error s a software auto-check. It d sappears when auto-check return to secure value. If error
pers st, call after-sale serv ce.
Secur ty software error
Any relay dr ver can have any problemn. Remove cook-top from the power supply, wa t a m nute
and sw tch on aga n. If error pers st, call after-sale serv ce.
Relays secur ty error
9
. AFTERCARE
— that the plug is correctly inserted and fused;
Before calling out a Service Engineer please check the
following:
If the fault cannot be identified switch off the appliance — do not
tamper with it — call the Aftercare Service Centre. The appliance is
supplied with a guarantee certificate that ensures that it will be
repaired free of charge at the Service Centre.
If
F
and numbers appears n the d splay, your un t has detected a fault.
The follow ng table l st act ons you can take to correct the problem.
D splay F and numbers
The ma n sw tch (ON/OFF key) was acc dentally touched or there s
any object above any key. Turn the un t on aga n w thout any object
about the keyboard. Enter your sett ngs aga n.
Use a razor blade and follow the "CLEANING" section.
The hob does not cut off.
The on-off cycles vary according to the required heat level:
Dark stains
Do not slide aluminium pans on the hob. Refer to the cleaning
recommendations.
Light surfaces on the hob
Caramelisation or melted plastic on the hob.
You use the correct materials, but the stains persist.
Refer to the "CLEANING" section.
Metal marks
Marks from an aluminium or copper pan, but also mineral, water or
food deposits; they can be removed using the cream cleaner.
Use a razor blade and follow the "CLEANING" section.
The hob does not operate or certain zones don't work
The shunts are not positioned correctly on the terminal board.
Have a check made that the connection is done he control panel is
locked. Unlock the hob.
The control panel is locked. Unlock the hob.
Frequency of on/off operations for cooking zones
- low level: short operating time,
- high level: long operating time.
Check the cond t on of the fuses / c rcu t breakers at your
locat on.Check to see f you are exper enc ng a power fa lure.
The cooktop has turned tself off.
The cooktop s not work ng.
11
GB
“Val d only for Cyprus”
